Wireless Access

Reply
Occasional Contributor II

Re: AP-215s can't find controller via ADP after upgrade to 6.5.4.2

Hey Colin,

 No doubt.  But even with the console cable, I wouldn't be able to do anything with it until the electricians show up to unmount the APs from the ceiling... they're 17 feet in the air... :-(

 

Niten 

Guru Elite

Re: AP-215s can't find controller via ADP after upgrade to 6.5.4.2

Are your access points statically configured?  Type "show log system 50" to see if there is a clue why they are not coming up...


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: AP-215s can't find controller via ADP after upgrade to 6.5.4.2

It appears that the access points can't create the GRE tunnel.  When I look at the datapath session table I see protocol 17 but not protocol 47...  

 

(Master) #show log system 50

 

Oct 17 07:19:18 :399899:  <4063> <INFO> |ipstm|  sapi_rsp, sapi.c:248: SAPI response service/level lookup failed

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:18 :399899:  <4063> <INFO> |ipstm|  sapi_rsp, sapi.c:248: SAPI response service/level lookup failed

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:18 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:19  KERNEL: [  306.867000]   0:alloc_vis_map: Allocated 7340032 bytes for fw_visibility(3975)

Oct 17 07:19:19  KERNEL: [  306.867000]   0:apsd_porf_getdmamem: physical address 0xB7000000, virtual address 0xc0000000b7000000, size 7340032

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message, len=88

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  papi_rcv_cb, Recvd PAPI Message from IKE

Oct 17 07:19:19 :348306:  <4063> <DBUG> |ipstm|  procIkeMessage, Received Unknown IKE message

Occasional Contributor II

Re: AP-215s can't find controller via ADP after upgrade to 6.5.4.2

Here's the output from the datapath command...

 

Source IP       Destination IP  Prot SPort DPort  Cntr    Prio ToS Age Destination TAge Packets    Bytes      Flags           

--------------- --------------- ---- ----- ----- -------- ---- --- --- ----------- ---- ---------  --------- ---------------

192.168.25.3    239.0.82.11     17   54532 8200   0/0     0    0   1   0/0/1       17   10         400        FC              

255.255.255.255 192.168.25.3    17   8200  54532  0/0     0    0   1   0/0/1       17   0          0          FY              

192.168.25.3    255.255.255.255 17   54532 8200   0/0     0    0   1   0/0/1       17   10         400        FC              

 

(Master) #show datapath session table 192.168.25.3

 

 

Datapath Session Table Entries

------------------------------

 

Flags: F - fast age, S - src NAT, N - dest NAT

       D - deny, R - redirect, Y - no syn

       H - high prio, P - set prio, T - set ToS

       C - client, M - mirror, V - VOIP

       Q - Real-Time Quality analysis

       I - Deep inspect, U - Locally destined

       E - Media Deep Inspect, G - media signal

       r - Route Nexthop

       A - Application Firewall Inspect

       B - Permanent, O - Openflow

 

Source IP       Destination IP  Prot SPort DPort  Cntr    Prio ToS Age Destination TAge Packets    Bytes      Flags           

--------------- --------------- ---- ----- ----- -------- ---- --- --- ----------- ---- ---------  --------- ---------------

255.255.255.255 192.168.25.3    17   8200  54532  0/0     0    0   1   0/0/1       18   0          0          FY              

192.168.25.3    255.255.255.255 17   54532 8200   0/0     0    0   1   0/0/1       18   10         400        FC              

 

(Master) #show datapath session table 192.168.25.3

 

 

Datapath Session Table Entries

------------------------------

 

Flags: F - fast age, S - src NAT, N - dest NAT

       D - deny, R - redirect, Y - no syn

       H - high prio, P - set prio, T - set ToS

       C - client, M - mirror, V - VOIP

       Q - Real-Time Quality analysis

       I - Deep inspect, U - Locally destined

       E - Media Deep Inspect, G - media signal

       r - Route Nexthop

       A - Application Firewall Inspect

       B - Permanent, O - Openflow

 

Source IP       Destination IP  Prot SPort DPort  Cntr    Prio ToS Age Destination TAge Packets    Bytes      Flags           

--------------- --------------- ---- ----- ----- -------- ---- --- --- ----------- ---- ---------  --------- ---------------

255.255.255.255 192.168.25.3    17   8200  54532  0/0     0    0   1   0/0/1       1a   0          0          FY              

192.168.25.3    255.255.255.255 17   54532 8200   0/0     0    0   1   0/0/1       1a   10         400        FC              

 

(Master) #show datapath session table 192.168.25.3

 

 

Datapath Session Table Entries

------------------------------

 

Flags: F - fast age, S - src NAT, N - dest NAT

       D - deny, R - redirect, Y - no syn

       H - high prio, P - set prio, T - set ToS

       C - client, M - mirror, V - VOIP

       Q - Real-Time Quality analysis

       I - Deep inspect, U - Locally destined

       E - Media Deep Inspect, G - media signal

       r - Route Nexthop

       A - Application Firewall Inspect

       B - Permanent, O - Openflow

 

Source IP       Destination IP  Prot SPort DPort  Cntr    Prio ToS Age Destination TAge Packets    Bytes      Flags           

--------------- --------------- ---- ----- ----- -------- ---- --- --- ----------- ---- ---------  --------- ---------------

255.255.255.255 192.168.25.3    17   8200  54532  0/0     0    0   1   0/0/1       1e   0          0          FY              

192.168.25.3    255.255.255.255 17   54532 8200   0/0     0    0   1   0/0/1       1e   10         400        FC              

 

Guru Elite

Re: AP-215s can't find controller via ADP after upgrade to 6.5.4.2

It looks like the access points are not setting up CPSEC.  Again, are your access points statically configured?  Protocol 17 is just UDP.

 

You should type "show log security 50 to see if there is another issue.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: AP-215s can't find controller via ADP after upgrade to 6.5.4.2

Hi... sorry.. My APs are all statically configured.  192.168.25.3-.5.  My controller is 192.168.25.2.

 

Below is the output of the command.

(Master) #show log security 50

 

Oct 17 07:17:35 :103093:  <3596> <WARN> |ike|   Starting cryptoPOST

Oct 17 07:17:50 :136008:  <4151> <DBUG> |survival|  init_rdwrap(): Max Number of users in RAD-DB:4096.

Guru Elite

Re: AP-215s can't find controller via ADP after upgrade to 6.5.4.2

I would be guessing without the AP console output.  When you get those access points down, the first thing you should do is make them DHCP.  It will make your life easier.  If you feel like it, paste the console output into here, when you get it so we can understand what might be going on.  I am assuming you opened a TAC case,


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: AP-215s can't find controller via ADP after upgrade to 6.5.4.2

Will do and yes.  I already have cases open with TAC... they've RMA'd my APs and are sending new ones... 

 

Niten 

Guru Elite

Re: AP-215s can't find controller via ADP after upgrade to 6.5.4.2

Niten,

 

Please post back and let us know how it turns out.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: AP-215s can't find controller via ADP after upgrade to 6.5.4.2

Hey Colin,

So I was able to get my APs down today and have my AP325 attached to a console cable... below is the output the AP is generating when booting....

 

 

APBoot 1.5.5.5 (build 55373)
Built: 2016-06-09 at 11:36:40

Model: AP-32x
DRAM: 235 MB
SF: Detected MX25U3235F with page size 64 kB, total 4 MB
Flash: 4 MB
NAND: 132 MiB
PCIE0: link up
PCIE1: link up
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0040 00002 00 00000004 00000000 00000000 00000000
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0040 00002 00 00000004 00000000 00000000 00000000
Power: 802.3at POE
In: serial
Out: serial
Err: serial
Net: eth0, eth1
Radio: qca9990#0, qca9990#1
Reset: cold
FIPS: passed

Hit <Enter> to stop autoboot: 0
Checking image @ 0x0
Copying image from 0x44000000

Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.
[ 0.000000]
[ 0.000000] Aruba Networks
[ 0.000000] ArubaOS Version 6.5.4.2 (build 61807 / label #61807)
[ 0.000000] Built by p4build@lesbos on 2017-10-07 at 01:34:34 PDT (gcc versio n 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) )
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: IPQ806X wave-2 board
[ 0.000000] Flash variant: default
[ 0.000000] msm_reserve_memory: 0x44600000, 0x200000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 58154
[ 0.075538] CPU1: Booted secondary processor
[ 0.102249] clk_tbl_nss - loaded
[ 0.212371] PCI: enabling device 0000:02:00.0 (0140 -> 0143)
[ 0.212558] PCI: enabling device 0000:00:00.0 (0140 -> 0143)
[ 4.954545] m25p80 spi5.0: found mx25u3235f, expected s25fl512s
[ 7.407935] Found AT97SC3203 on i2c-gpio0
[ 7.465104] no pmic restart interrupt specified
[ 8.104842]
[ 8.104842] Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT
[ 8.184067] Starting Kernel HMAC-SHA1 KAT ...Starting Kernel DES KAT ...Compl eted Kernel DES KAT
[ 8.290378] Starting Kernel AES KAT ...Completed Kernel AES KAT
[ 8.334114]
[ 8.379912] Completed Kernel HMAC-SHA1 KAT
[ 8.429896] Starting Kernel AESGCM KAT ...Completed Kernel AESGCM KAT
AP-type has_ble_support: ONBOARD.
Domain Name: arubanetworks.com
The APBoot version: 55373
APBoot is up to date
Done.
No panic info available
Writing /dev/ttyHSL2 into /tmp/ble_port
Enabling ble_daemon via nanny
[ 12.407372] nss_driver - fw of size 391744 bytes copied to load addr: 400000 00, nss_id : 0
[ 12.516526] nss_driver - Turbo Support 1
[ 12.551046] Supported Frequencies - 110Mhz 550Mhz 733Mhz
[ 12.621055] nss_driver - fw of size 190016 bytes copied to load addr: 408000 00, nss_id : 1
Ethernet port 1 mode: tunnel
WARNING: eth0 is down; using eth1 for uplink
[ 33.411621] drvlog_mod: module license 'Proprietary' taints kernel.
[ 33.474195] Disabling lock debugging due to kernel taint
[ 33.567447] init_asap_mod: installation:0
[ 33.603061] ethernet_device_event: dev eth0 is up
[ 33.669447] firewall cpu: core-1
[ 34.274570] ethernet_device_event: dev eth0 is changed, carrier: 0
[ 35.492096] ethernet_device_event: dev eth0 is changed, carrier: 1
Starting watchdog process...
Starting update SBL2 ...
SBL2 was updated already
[ 36.566447] Settng Jumbo MRU 2000
Done.
Got all network params from APboot env. Skipping DHCP
Static IP detected. Checking if LACP needs to be configured
LACP setting not required. AP can ping default gateway
192.168.25.5 255.255.255.0 192.168.25.1
Running ADP...cat: /tmp/master: No such file or directory
Done. Master is
cat: /etc/syslog.conf: No such file or directory
killall: nanny: no process killed
killall: sapd: no process killed
Sending SIGKILL to all processes.
Unmounting UBIFS completed.
Please stand by while rebooting the system.
[ 137.327428] Restarting system.


APBoot 1.5.5.5 (build 55373)
Built: 2016-06-09 at 11:36:40

Model: AP-32x
DRAM: 235 MB
SF: Detected MX25U3235F with page size 64 kB, total 4 MB
Flash: 4 MB
NAND: 132 MiB
PCIE0: link up
PCIE1: link up
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0040 00002 00 00000004 00000000 00000000 00000000
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0040 00002 00 00000004 00000000 00000000 00000000
Power: 802.3at POE
In: serial
Out: serial
Err: serial
Net: eth0, eth1
Radio: qca9990#0, qca9990#1
Reset: warm
FIPS: passed

Hit <Enter> to stop autoboot: 0
Checking image @ 0x0
Copying image from 0x44000000

Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.
[ 0.000000]
[ 0.000000] Aruba Networks
[ 0.000000] ArubaOS Version 6.5.4.2 (build 61807 / label #61807)
[ 0.000000] Built by p4build@lesbos on 2017-10-07 at 01:34:34 PDT (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) )
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: IPQ806X wave-2 board
[ 0.000000] Flash variant: default
[ 0.000000] msm_reserve_memory: 0x44600000, 0x200000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 58154
[ 0.075538] CPU1: Booted secondary processor
[ 0.102624] clk_tbl_nss - loaded
[ 0.214276] PCI: enabling device 0000:02:00.0 (0140 -> 0143)
[ 0.214464] PCI: enabling device 0000:00:00.0 (0140 -> 0143)
[ 4.966135] m25p80 spi5.0: found mx25u3235f, expected s25fl512s
[ 7.484067] Found AT97SC3203 on i2c-gpio0
[ 7.542861] no pmic restart interrupt specified
[ 8.186379]
[ 8.186379] Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT
[ 8.265573] Starting Kernel HMAC-SHA1 KAT ...Starting Kernel DES KAT ...Completed Kernel DES KAT
[ 8.371883] Starting Kernel AES KAT ...Completed Kernel AES KAT
[ 8.415620]
[ 8.461449] Starting Kernel AESGCM KAT ...Completed Kernel HMAC-SHA1 KAT
[ 8.583099] Completed Kernel AESGCM KAT
AP-type has_ble_support: ONBOARD.
Domain Name: arubanetworks.com
The APBoot version: 55373
APBoot is up to date
Done.
No panic info available
Writing /dev/ttyHSL2 into /tmp/ble_port
Enabling ble_daemon via nanny
[ 12.458825] nss_driver - fw of size 391744 bytes copied to load addr: 40000000, nss_id : 0
[ 12.568041] nss_driver - Turbo Support 1
[ 12.602561] Supported Frequencies - 110Mhz 550Mhz 733Mhz
[ 12.672571] nss_driver - fw of size 190016 bytes copied to load addr: 40800000, nss_id : 1
Ethernet port 1 mode: tunnel
WARNING: eth0 is down; using eth1 for uplink
[ 33.474539] drvlog_mod: module license 'Proprietary' taints kernel.
[ 33.537113] Disabling lock debugging due to kernel taint
[ 33.630865] init_asap_mod: installation:0
[ 33.666416] ethernet_device_event: dev eth0 is up
[ 33.732895] firewall cpu: core-1
[ 34.331896] ethernet_device_event: dev eth0 is changed, carrier: 0
[ 35.573445] ethernet_device_event: dev eth0 is changed, carrier: 1
Starting watchdog process...
Starting update SBL2 ...
SBL2 was updated already
Done.
[ 36.647797] Settng Jumbo MRU 2000
Got all network params from APboot env. Skipping DHCP
Static IP detected. Checking if LACP needs to be configured
LACP setting not required. AP can ping default gateway
192.168.25.5 255.255.255.0 192.168.25.1
Running ADP...cat: /tmp/master: No such file or directory
Done. Master is
cat: /etc/syslog.conf: No such file or directory
killall: nanny: no process killed
killall: sapd: no process killed
Sending SIGKILL to all processes.
Unmounting UBIFS completed.
Please stand by while rebooting the system.
[ 137.392814] Restarting system.


APBoot 1.5.5.5 (build 55373)
Built: 2016-06-09 at 11:36:40

Model: AP-32x
DRAM: 235 MB
SF: Detected MX25U3235F with page size 64 kB, total 4 MB
Flash: 4 MB
NAND: 132 MiB
PCIE0: link up
PCIE1: link up
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0040 00002 00 00000004 00000000 00000000 00000000
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0040 00002 00 00000004 00000000 00000000 00000000
Power: 802.3at POE
In: serial
Out: serial
Err: serial

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: