Wireless Access

Regular Contributor I

AP-220-MNT-C2 mounts

Getting ready to mount about 500 AP215.  We bought the correct mounts AP-220-MNT-C2 for the ceiling tile rails we have and they fit good and snug BUT the cieling tiles are not going to be able to sit flush against the rail anymore as the mount gets in the way.


Are we suppose to trim/notch 500 of our tiles?   Don't answer that I already know the answer but I do want to ask if anyone has come up with any other cost effective ways to mount these APs to the rails of the ceiling or directly to the tiles?  We used a bolt into the AP105 that fit perfectly into the channel of the rails in the past worked really well.  5 cents a bolt and done.



Guru Elite

Re: AP-220-MNT-C2 mounts

There's a new mount where the AP is flush with the ceiling tile.



| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
Showing results for 
Search instead for 
Did you mean: