Wireless Access

Reply
Highlighted
Occasional Contributor I

AP 225 HT WLAN mode on 5GHz radio

I currently have a solid amber light on my 5GHz LED, and according to Aruba documentation this means that it's in non HT WLAN mode.  What config changes do I need to make to place it in HT WLAN mode?  I've already enabled Very High Throughput in the High-throughput SSID profile, but that doesn't seen to work.  Any suggstions?

MVP Guru

Re: AP 225 HT WLAN mode on 5GHz radio

Did you check under the RF profile ?

Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I

Re: AP 225 HT WLAN mode on 5GHz radio

Yes, everthing HT is checked, yet the 5 GHz light remains amber.

MVP Guru

Re: AP 225 HT WLAN mode on 5GHz radio

if you do a show ap active | include <ap name>, what do you see ?

 

11a Ch/EIRP/MaxEIRP 
---- ----- ---------- ----------- 
 AP:HT:140/15/22.5

Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I

Re: AP 225 HT WLAN mode on 5GHz radio

Here's the output from the show ap active cmd

 

capture.PNG

Guru Elite

Re: AP 225 HT WLAN mode on 5GHz radio

The entire a radio is disabled on that access point.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: