Wireless Access

Reply
Guru Elite

Re: AP-225 in Powersave mode performance

It *might* help.  It could not hurt.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars
Highlighted
Occasional Contributor I

Re: AP-225 in Powersave mode performance

Ok, I will try within these days. Thank you!

New Contributor

Re: AP-225 in Powersave mode performance

Did you find a resolution to this?  I'm having the same problem, though my Cisco switch does not have LLDP configured.

New Contributor

Re: AP-225 in Powersave mode performance

I had similar issue using Avaya 4850 switches.

issue ended up being the LLDP command limiting power to individual ports.

this is the command from Avaya CLI that limited ports to 802.3af

no lldp tx-tlv port 1/ALL,2/ALL dot3 mdi-power-support  

 

Once command was disabled, AP's started functioning at full power. Power LED changed to green. AP did not need to be rebooted.