Wireless Access

Upcoming community maintenance Oct. 27th through Oct. 29th
For more info click here
Reply
Highlighted
Guru Elite

Re: AP-225 in Powersave mode performance

Cartman,

 

How do you know they are not at full power?  Does the Huawei switch say how much power they are drawing?  Does the access point say they are not at full power?

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor I

Re: AP-225 in Powersave mode performance

1, From AP front LED, the power light is amber.

2, From AP power status, it shows poe-AF... about operational state

3, From Switch monitor page, it shows only 9w power is used.

Highlighted
Guru Elite

Re: AP-225 in Powersave mode performance

Cartman,

 

Did you open a TAC case so ensure that your configuration is correct and there is not some incompatibility between the AP225 and the Huawei switch?

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor I

Re: AP-225 in Powersave mode performance

I'm not sure if i have efficient authorization to open a case. also I'm thinking about the compatible issue.

Till now no good solution.

 

Highlighted
Guru Elite

Re: AP-225 in Powersave mode performance

Cartman,

 

Did you try enabling LLDP on any of the ports?  http://support.huawei.com/enterprise/docinforeader.action?contentId=DOC1000019448&partNo=100112

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor I

Re: AP-225 in Powersave mode performance

I have enable the LLDP on my switch S5700-24TP-PWR-SI, but the strange thing is the LLDP Negotiated POE power is only 0.2w, this is I find from AC about AP power status.

Highlighted
Guru Elite

Re: AP-225 in Powersave mode performance

What version of ArubaOS are you running?  


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor I

Re: AP-225 in Powersave mode performance

Hi ,  it is 6.4.1.0

Highlighted
Guru Elite

Re: AP-225 in Powersave mode performance

Is there any way you can upgrade at some point? Here is a poe big fixed in 6.4.1.1

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor I

Re: AP-225 in Powersave mode performance

Hi, So the update include the fix to my problem? i will try with that.