Hi,
I have a problem with AP-275. I'm using HP procurve 2530 to connect three access points, two 225 and one 275. AP 225 are working fine but AP-275 doesn't get enough power. I have always same error:
Sep 22 12:37:41 KERNEL(Piscina_Principal@172.16.253.5): [ 87.699373] bonding: bond0: releasing backup interface eth1
Sep 22 12:37:41 KERNEL(Piscina_Principal@172.16.253.5): [ 87.788414] Disable device eth1 due to insufficient POE voltage.
I have disconnected AP's 225, and i tried to boot with only one AP 275, but doesn't work.
If I take a look to AP 275 Power system status I have this message:
Power Status
Operational State | POE-AT: No restrictions (Overridden by LLDP) |
Current HW State | POE-AF: Ethernet port 1 disabled; All radios disabled; |
LLDP Negotiated POE Power | 25.5W |
I have another HP procurve 2530 with two AP275 and no one is working. Same problem too.
I have an Aruba controller 7210 with firmware version 6.4.2.0
Any idea where is the problem?
Thank you in advance.
#7210#AP225