Wireless Access

last person joined: 9 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

AP-305 Stuck in boot loop.

This thread has been viewed 7 times
  • 1.  AP-305 Stuck in boot loop.

    Posted Jul 26, 2018 03:18 PM

    Hi,

     

    I've got a Aruba Ap-305 that keep rebooting over and over. Here is what i see when connecting in console port:

     

    APBoot 2.1.4.13 (build 59885)
    Built: 2017-05-31 at 11:58:55

    Model: AP-30x
    DRAM:  512 MiB
    Flash: Detected MX25R3235F: total 4 MiB
    NAND:  192 MiB
    PCIE0 link up
           dev fn venID devID class  rev    MBAR0    MBAR1    MBAR2    MBAR3
           00  00  168c  0040 00002   00 00000004 00000000 00000000 00000000
    Power: 802.3af POE
    nand0: partition (aos0) size alignment incorrect
    Error initializing mtdparts!
    Net:   eth0
    Radio: qca9990#0, ipq4029#1
    Reset: cold
    FIPS:  passed

    Hit <Enter> to stop autoboot:  0
    Checking image @ 0x0
    nand0: partition (aos0) size alignment incorrect
    Error initializing mtdparts!
    Error, no UBI device/partition selected!
    Invalid image format version: 0x0
    Checking image @ 0x2000000
    nand0: partition (aos0) size alignment incorrect
    Error initializing mtdparts!
    Error, no UBI device/partition selected!
    data abort
    pc : [<87313c70>]          lr : [<8731120c>]
    sp : 870efdc8  ip : 0fb82e38     fp : 00000000
    r10: 00000000  r9 : 870eff34     r8 : 00000000
    r7 : 00000000  r6 : 01800000     r5 : 02000000  r4 : 84000000
    r3 : 00000083  r2 : 0a000021     r1 : 0000000a  r0 : 02000000
    Flags: nzCv  IRQs off  FIQs off  Mode SVC_32
    Resetting CPU ...

     

    Is there something i can do to fix this??

     

    Thanks.



  • 2.  RE: AP-305 Stuck in boot loop.
    Best Answer

    EMPLOYEE
    Posted Jul 26, 2018 03:24 PM