Wireless Access

Reply
Highlighted
New Contributor

AP-367 mounting

Hi all,

 

I recently purchased several AP-367 outdoor AP's. They came with the standard mount which allows for pivoting on the vertical axis, but not horizontal. I'd like to mount the AP on a north facing wall, but point it north east. Does the AP keep the same broadcast pattern if I were to rotate the mount 90 degrees? Or would I need to get a different mount?

 

Thanks.


Accepted Solutions
Highlighted
Aruba Employee

Re: AP-367 mounting

Hi,

 

You can have a small pole / arm where you can mount the AP. This can help you change the horizontal direction..

ayman_mukaddam_0-1602618335455.png

 

In a testing setup, I had the same challenge and I deployed the AP (rotated by 90 degrees). It worked properly knowing it is 90x90..However, I don't like how it will look so I prefer option 1.

 

View solution in original post

Highlighted
New Contributor

Re: AP-367 mounting

Thanks for the info and for verifying it will work in a rotated
configuration. I don't really like it either, I'd think it would be worse
for water ingress. I'll look into your suggestion.

Thanks.

View solution in original post


All Replies
Highlighted
Aruba Employee

Re: AP-367 mounting

Hi,

 

You can have a small pole / arm where you can mount the AP. This can help you change the horizontal direction..

ayman_mukaddam_0-1602618335455.png

 

In a testing setup, I had the same challenge and I deployed the AP (rotated by 90 degrees). It worked properly knowing it is 90x90..However, I don't like how it will look so I prefer option 1.

 

View solution in original post

Highlighted
New Contributor

Re: AP-367 mounting

Thanks for the info and for verifying it will work in a rotated
configuration. I don't really like it either, I'd think it would be worse
for water ingress. I'll look into your suggestion.

Thanks.

View solution in original post

Highlighted
MVP Expert

Re: AP-367 mounting

One quick addition, we will have in the November price list and shipping shortly thereafter a dual axis tilting mount for this specific use case which will work for all the 270 and later outdoor APs. 


Jerrod Howard
Distinguished Technologist, TME
Highlighted
Super Contributor II

Re: AP-367 mounting

Finally!

 

 

Dustin Burns
Senior Mobility and Access Engineer @WEI
ACMX #509 | ACCX #1272 | ACSP | ACDA | ACEP | CCNP | CCDP | CCNA Wireless

If my post address your queries, give kudos and accept as solution!
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: