Wireless Access

Upcoming community maintenance Oct. 27th through Oct. 29th
For more info click here
Reply
Highlighted
Contributor I

AP-375 not shown on 7220 controller

As a beginner i tried to setup my network after i watched some youtube tutorials. Today i was able to obtain my licenses from asp portal and i installed on my 7220 controller 10x full ap licenses (ap, pef, rf).Right after that i tried to connect my access points to my controller but with no success. Controller and the access points are on the same network (layer 2).

  • I have a router that have DHCP server on, after this router i have a non-managed switch L2, so all connected clients with dhcp client will have internet from the router
  • AP-375 is getting ip 192.168.100.106 from dhcp server (router and gateway)
  • I had set static IP on controller 192.168.100.210
  • If i ping AP (192.168.100.106) from the controller (192.168.100.210) on the maintenance tab the result are 5/5 succees, so they can see each other.
  • I have enabled "Enable auto cert provisioning" on the controller.
  • Controller OS: 8.1.0.4
  • AP OS: 8.3.0.13

Still not figure out how to connect the AP to the controller.

On AP webif i found a tab "convert" where i can choose between standalone, Campus ... and Remote controlled. Tried campus and remote with the controller IP but i after some seconds i have an error "Image verfy failed ...".

 

Can someone help me to connect those APs to my controller please ?


Accepted Solutions
Highlighted

Re: AP-375 not shown on 7220 controller

Start by upgrading your controller to 8.5.0.10 or 8.6.0.5

Than start with cpsec auto-cert

 

On your ap go to convert and convert it to campus ap.

 

Be sure to add ( just in case ) your ap mac to campus ap whitelist in your controller.

Check pings from controller cli to ap IP

Check show log security 50

Check show log errorlog 50

Check show log system 50

Share it with us. The more info the more help we will be able to provide.

 

show ap database-summery will be helpful also.

 

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************

View solution in original post


All Replies
Highlighted
Guru Elite

Re: AP-375 not shown on 7220 controller

SSH onto the controller.

Type "show log system 50" to see if you see anything.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted

Re: AP-375 not shown on 7220 controller

Start by upgrading your controller to 8.5.0.10 or 8.6.0.5

Than start with cpsec auto-cert

 

On your ap go to convert and convert it to campus ap.

 

Be sure to add ( just in case ) your ap mac to campus ap whitelist in your controller.

Check pings from controller cli to ap IP

Check show log security 50

Check show log errorlog 50

Check show log system 50

Share it with us. The more info the more help we will be able to provide.

 

show ap database-summery will be helpful also.

 

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************

View solution in original post

Highlighted
Contributor I

Re: AP-375 not shown on 7220 controller

uploaded on a file ... 

Highlighted
Guru Elite

Re: AP-375 not shown on 7220 controller

The controller needs to be on a minimum of 8.3.0.0 and above, according to the AP-375 datasheet:

https://www.arubanetworks.com/assets/ds/DS_AP370Series.pdf


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Contributor I

Re: AP-375 not shown on 7220 controller

Thank you. Updated at 8.6.0.4 and i have my first AP connected ... is time to go forward with my setup. Hope i will not need to open any new topic. Thanks again.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: