Wireless Access

Occasional Contributor II

AP 93H not discovered

I have a problem with AP 93H not beeing discovered by the controller..


I am using controller 3600 not sure about the OS version, connecting to the AP using console shows that it is getting an IP address but still not showing on the controller. The controller is working fine as other APs are beeing discovered normally without any issues so I am suspecting that the AP is faulty.


The following is the last couple of lines from the AP console, not if it is healpful attached aslo test file including more from the console


Getting an IP address...
ag7240_ring_alloc Allocated 640 at 0x82d66800
ag7240_ring_alloc Allocated 4032 at 0x82dad000
Virian MDC CFG Value ==> 4
Setting PHY...
ATHRSF1_PHY: Port 0, Neg Success
ATHRSF1_PHY: unit 0 phy addr 0 Not enabling interrupts in AR7242 yet...
ADDRCONF(NETDEV_UP): bond0: link is not ready

Guru Elite

Re: AP 93H not discovered

The AP93H has a minimum code level of http://www.arubanetworks.com/pdf/products/DS_AP93H.pdf


You only have  You need to upgrade your controller code.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: AP 93H not discovered

Will upgrade the os and tryb gain, thank you.
Search Airheads
Showing results for 
Search instead for 
Did you mean: