Wireless Access

Reply
Contributor II

AP-CBL-SER serial console pinout (AP103 and many others)

Maybe it will make a few life easier. I have seen some confusing posts on this subject.

 

This is a correct pinout of AP-CBL-SER serial console cable for IAP-103 and many more APs. Instead of buying ridiculously expensive Aruba cable, do it your self.

 

All you need is:

- TTL (pins) to RS232 (DB9f) adapter (approx. 1 EUR), keep in mind that adapter should work with 3.3-5v voltage range, not more! I used Arduino platform adapter to DB9 female.

- 4 wire cable (even 3 should work, without VCC).

 

See attached picture.

AP-CBL-SER pinout

Contributor II

Re: AP-CBL-SER serial console pinout (AP103 and many others)

hi, thank you for this nice post. What type of connector did you use thats going into the ap?

Highlighted
Contributor II

Re: AP-CBL-SER serial console pinout (AP103 and many others)

Hi, I just used separate female electric cable connectors on each wire for
simplicity.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: