Wireless Access

Reply
Contributor I

AP Channel Assignment Without ARM

Hi All

 

I have noticed that within our Aruba deployment (not configured by me) we have an AP group for external APs and the ARM profile assignment is set to "disable", looking at the radio profile there is no channel set and the regulatory domain profile is default, there is also no AP specific configuration. My question is, in this situation how is the channel assignment done, do the APs simply pick a channel when they boot and stick to it?

 

Thanks in advance

 

Dave

Guru Elite

Re: AP Channel Assignment Without ARM

And the transmit eirp will also be taken from the radio profile.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Contributor I

Re: AP Channel Assignment Without ARM

The transmit EIRP is set quite high so all access points are currently at their maximum. I'm trying to work out if there is a good reason for this configuration, and if not I will create a new appropriate ARM profile and let ARM do it's thing.

Guru Elite

Re: AP Channel Assignment Without ARM

For a single access point, maybe. For multiple access points, no.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: