Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP Failover

This thread has been viewed 3 times

  • 1.  AP Failover

    Posted Feb 22, 2019 09:21 AM

    Hi All,

     

    How can I find what triggered the following AP failover? All of my APs failed from one controller to the other, but I find why.

     

     

    (MC-02) #show ap debug system-status ap-name AP-01

    [...]

    HA Failover Information
-----------------------
Date       Time     Reason (Latest 10)
--------------------------------------
2019-02-13 13:45:47 Failover request from standby: fail-over to 10.1.1.2


  • 2.  RE: AP Failover

    MVP EXPERT
    Posted Feb 22, 2019 09:25 AM

    What kind of Aruba environment is this? Master-Local, VRRP, Clustered etc? In the first instance check the logs to see if a controller rebooted and the APs lost connectivity. If all APs failed over at the same time then its possible there was  network interruption at some point.

     

    show log all | Include [AP NAME or IP]


  • 3.  RE: AP Failover

    Posted Feb 22, 2019 09:39 AM

    This is a master-local environment, 6.5.x with a redundancy group configured. The logs don't show anything during this time related to APs failing over, only power adjustments.