Wireless Access

Reply
Regular Contributor I

AP mesh topology in the web interface Version 8.3

HI I'm running 8.3.0.12 we have lot of mesh AP's. When we were on version 6.4 we used to be able to look at the mesh's with the web interface. Now I have to log into each controller CLI to do show ap mesh topology. It would be lot easier if I could do that from the MM dashboard. 

Highlighted
Frequent Contributor II

Re: AP mesh topology in the web interface Version 8.3

Are you talking about viewing the Mesh APs? If so you can find it under configuration > Access Points > Mesh APs.

 

If your looking for Mesh configurations, you can find it under System > Profiles > Mesh.

Dustin Burns
Senior Mobility and Access Engineer @WEI
ACMX#509 | ACCP | ACSA | CCNP | CCDP | CCNA Wireless
Highlighted
Frequent Contributor II

Re: AP mesh topology in the web interface Version 8.3

Also, if you go to Configuration > AP Groups > Select AP Group > Mesh, you can see the Mesh APs and their information there as well.

Dustin Burns
Senior Mobility and Access Engineer @WEI
ACMX#509 | ACCP | ACSA | CCNP | CCDP | CCNA Wireless
Highlighted
Regular Contributor I

Re: AP mesh topology in the web interface Version 8.3

I'm not looking for the configuration I'm looking for the page that shows the web interface version of the CLI show ap mesh topology . That shows the current RSSI and other information about the mesh. Also shows what AP is a portal and a point. The version 8 only shows all AP's configured for mesh. I know what my configuration is I like to check the RSSI. 

 

I will include a picture 

 

Highlighted
MVP Expert

Re: AP mesh topology in the web interface Version 8.3

Sorry for a long delay, not checking community often...

 

Mesh GUI is coming in AOS 8.7. As far as seeing a 'topology' view, that will have to wait for AirWave / Central to support, not sure of that timeline.


Jerrod Howard
Distinguished Technologist, TME
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: