Wireless Access

I am having a problem adding an AP to a 3600 controller running 6.1.3.0 software.

I connected a new AP to the network and it shows up on the controller with a IL flags (Inactive and unlicensed)

There are 24 unused licenses on the controller. (See screenshots)

I've tried a couple different new AP's but they all show up the same way.

Control plane security is off.

I've rebooted the controller as well.... no luck.

Any ideas????

Can't tell from your limited screen shot if you have other feature licenses on the same controller.

For instance, do you have PEF/PEFNG and/or WIP/RFP licenses as well ?

If you do, are they quantity = 128 or quantity = 152 ?

JF 

(Master_Aruba3600-US) #show ap license-usage

Total AP Licenses                       : 152

Remote-Node AP Licenses Used            : 0

AP Licenses Used                        : 128

 Tunneled Node Licenses Used                     : 0

Unused AP Licenses                      : 24

Licenses used for Campus AP's           : 128

Available Campus AP's                   : 0

Licenses used for Remote AP's           : 0

Available Remote AP's                   : 0

Total Ortronics AP Licenses             : 0

Ortronics AP Licenses Used              : 0

Total Indoor Mesh AP's Supported        : 512

 Indoor Mesh AP's Active                 : 0

Total Outdoor Mesh AP's supported       : 512

Outdoor Mesh AP's Active                : 0

Total PEF Licenses                      : 152

Remote-Node PEF Licenses Used           : 0

PEF Licenses Used                       : 128

Total 802.11n-120abg Licenses   : 0

 802.11n-120abg Licenses Used    : 0

Total 802.11n-121abg Licenses   : 0

802.11n-121abg Licenses Used    : 0

Total 802.11n-124abg Licenses   : 0

802.11n-124abg Licenses Used    : 0

Total 802.11n-125abg Licenses   : 0

802.11n-125abg Licenses Used    : 0

A 3600 will only support 128 Campus APs.  Aruba allows more AP licenses because a 3600 can support up to 512 remote APs (RAPs).

If these are all in Campus AP (CAP) mode, you have hit the limit of the 3600.

Wow.... i should have known that. It must be a Friday.... time to go home I think.

Thanks

Friday is good :)

WIth the full snapshot of the licensing output it can been seen that you have all APs in campus mode.

Notice the 'number of remote APs available: 0' output...   zero is zero ;)