Wireless Access

Reply
Contributor I

AP105 only connects to 100 Mbps

Gents,

 

I have an AP 105 and was working fine for the last few months, the last week I noticed the AP is connecting only to 100 Mbps..(amber light is ON - ENET led ) the AP was connecting to 1000 Mbps ... 

The AP is connected to one of the S2500 I have.. But the weirdthingisifIconnectanotherAPinthesameportitwillconnectto1000 Mbps.. :smileysad:

Tried different things like...  purge the AP ... Connect AP to different ports and I got the same issue.. 

Any one have a different suggestion? 

-Should update the AP image? 

-RMA??

 

Im running 6.3.1.1

 

Guru Elite

Re: AP105 only connects to 100 Mbps

Did you try a new cable?

What happens when you hard set the port to 1000? Does the AP have link?

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Contributor I

Re: AP105 only connects to 100 Mbps

Yes sir, i tried ... and same thing.. Even connecting the AP direct to the S2500 (tried different ports) using a Cat 6 or Cat5e patch cable doesn't work..  :smileysad:

 

 

 

 

Guru Elite

Re: AP105 only connects to 100 Mbps

I would contact TAC and initiate an RMA.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: