Wireless Access

Reply
Occasional Contributor II

AP125 Unable to contact switch

Hi,

 

My AP125 was connected to my XM3200 controller fine but after upgrading to ArubaOS 6.4 from 6.2 on the controller, the AP no longer connects to the controller.

 

I see the following on the AP boot:

unable.JPG

 

The AP can ping the controller and the controller can ping the AP. 

Guru Elite

Re: AP125 Unable to contact switch

Please open a case with TAC so that they can get to the bottom of this.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: