Wireless Access

Contributor I

AP225 Link Aggregation - Step by Step Guide



I have read various articles on how to enable GRE stripping but was hoping that someone could post a guide of how to do it on the GUI.  I am only using 2 x SSID's, Corporate and guest'.  I'm not using VLAN's.


I have a few of related questions:


1). Can you enable GRS stripping on the default AP group?


2). Do I have to set up another AP group and add all AP's to it i.e. 'AP-Group LACP'?


3). Do you set the LMS IP to the same IP address as the controller?


Any screen shots would be much appreciated.


Using 6.4


Thank you in advance





Guru Elite

Re: AP225 Link Aggregation - Step by Step Guide

You should not use the default AP group.


Take a look here:




| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
Showing results for 
Search instead for 
Did you mean: