I am seeing an AP225 in power saving mode when using an injector. The injector is rated for 802.3at but the AP is not negotiating correctly.
I have switched the power injector with no change. Here's the output:
Power Status
------------
Operational State POE-AF: One Ethernet port disabled; USB port disabled; 1x3 chain for 2.4GHz; 3x3 chain for 5GHz
----------------- -----------------------------------------------------------------------------------------------
Current HW State POE-AF: One Ethernet port disabled; USB port disabled; 1x3 chain for 2.4GHz; 3x3 chain for 5GHz
LLDP Negotiated POE Power 0.0W
Another AP on that same injector works fine. Changing the injector did not help. What should I do?