Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP335 LEDs

This thread has been viewed 11 times

  • 1.  AP335 LEDs

    MVP
    Posted Apr 25, 2017 09:10 AM

    Since the IAP install guide info on the LEDs seems at best incomplete or at worst plain wrong, I was hoping someone here might have an up to date list.

    OR are the campus AP leds somehow different from the IAP version?



  • 2.  RE: AP335 LEDs

    EMPLOYEE
    Posted Apr 25, 2017 09:19 AM
    Please be specific.


  • 3.  RE: AP335 LEDs

    MVP
    Posted Apr 25, 2017 11:45 AM

    Hard to be specific if I want to know ALL the LED state meanings.

    Examples that seem to be missing or incorrect:

     

    1) I've got AP335's where the system status LED is amber. The IAP install doc doesn't list any amber state for the system LED.

    -> this appears to be on 100Mbps links

     

    2) which then contradicts the install guide as Green flashing should be uplink < 1Gbps or non-HT radio (which is weird too: why a radio state on the system led?)

     

    3) our AP335 system LED is flashing for (pretty much?) all our deployed APs even though they are connected at 1Gbps and both radio's have HT enabled.

     



  • 4.  RE: AP335 LEDs
    Best Answer

    EMPLOYEE
    Posted Apr 25, 2017 12:45 PM
      |   view attached
    Is this the install guide that you are using?

    https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/EntryId/21959/Default.aspx


  • 5.  RE: AP335 LEDs

    MVP
    Posted Apr 25, 2017 12:48 PM

    Nope, I was looking at an old version from May 2016 apparently.

    Guess I need to save less docs offline and go look online very time.

     

    Thanks for setting me straight :D