Wireless Access

last person joined: 12 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

APBoot Commands / Problem with APBoot 1.0.8.3 on AP124

This thread has been viewed 7 times

  • 1.  APBoot Commands / Problem with APBoot 1.0.8.3 on AP124

    Posted Oct 17, 2012 06:29 AM

    Hi,

     

    received some faulty AP124 with 0xFFFFFFFF "image invalid" , i tried booting up on OS 6.1.3.4 , i did "purge , save , boot" also "clear OS" , didnt help . i attached the AP124 some some legacy 5.0.4.7 controller and voila the AP properly booted and upgraded it's image in provision.

     

    I dont have a clue at the moment ( i do such things once a year perhaps) how again i can upgrade the boot OS so it's valid for newer 6.x controllers. normally this should work automically but not in my case.

     

    Again :

    -AP124 had 0xFFFFFFFF invalid image , reboot loop in OS 6.x

    -attached to OS 5.x controller, AP comes properly up and i can provison him ,.

     

    in the APboot Menu i see "upgrade" but i dont know the syntax , perhaps too dumb today (as always)

     

    thanks!