Wireless Access

last person joined: 12 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

APs in US on ROW (UK) Controller

This thread has been viewed 0 times

  • 1.  APs in US on ROW (UK) Controller

    Posted Aug 02, 2017 04:26 AM

    Hi,

     

    We have a pair of 7210-ROW controllers running APs in the UK and Ireland.

     

    We have a few offices in the US and want to run APs there from the UK controllers.   I can create a new AP Group with a new Regularory Domain set to US.

     

    Will this work?   Or do I need to buy new US controllers to run the US APs?

     

    Thanks

     

    Joe



  • 2.  RE: APs in US on ROW (UK) Controller

    EMPLOYEE
    Posted Aug 02, 2017 04:45 AM
    You need to buy a controller for US APs...

    http://community.arubanetworks.com/t5/Controller-Based-WLANs/Can-we-terminate-a-restricted-AP-on-any-unrestricted-or/ta-p/175432

    US APs can only terminate on US controllers.


  • 3.  RE: APs in US on ROW (UK) Controller

    Posted Aug 02, 2017 05:27 AM

    Hi,

     

    Thanks for your reply.

     

    From looking at the parts list:

    http://www.arubanetworks.com/assets/ds/DS_AP300Series.pdf

    There is only one part number for AP-305 (JX936A)  There dosn't appear to be different regulatory domain APs.  So if that connects to the controllers and is put in to a 'US AP Group'  What would happen?

     

    Thanks

     

    Joe



  • 4.  RE: APs in US on ROW (UK) Controller

    EMPLOYEE
    Posted Aug 02, 2017 07:02 AM
    An AP that is in an ap-group that has a regulatory domain of US will not come up on a ROW controller. You will get a regulatory domain error. You can add a local controller that has a US regulatory domain and terminate the AP with the US regulatory domain there.