ARM Setting Poor Quality
08-25-2017 08:59 AM
I have a user remote user who keeps on complaining about poor performance on a RAP 3W.
When I look at the peformance of the RAP it shows up as poor.
I have ARM enabled on the SSID with the default Channel of 70% for threshold and Channel Quality Wait time of 120 seconds. This AP never changes the channel.
Is there something else I should be looking at like reducing TX or RX power or should I change the default thresold or channel wait time to something else
Re: ARM Setting Poor Quality
08-25-2017 10:30 AM
A Rap3 only has a single radio, and chances are, it is on 2.4ghz. It could be that the 2.4ghz band at that location is poor and you don't have any good choices, period.
show ap monitor channel ap-name <name of ap>
That will show you how the controller sees the RF around that AP.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide