Wireless Access

Occasional Contributor I

ARM only for a and g in controller



I have 2 Aruba 7030 controllers with ~60 AP 205 (802.11n/ac).


The problem is that in my controller, I can only change ARM for 802.11a and 802.11g (you can see it in the picture below).


Is there something I don't understand ?


Thank you

Guru Elite

Re: ARM only for a and g in controller

802.11a and 802.11g should be considered the 5ghz and 2.4ghz spectrum, which are the only two bands that you have in wifi, whether it is 802.11ac or 802.11n.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor I

Re: ARM only for a and g in controller

Thank you very much !

Search Airheads
Showing results for 
Search instead for 
Did you mean: