Wireless Access

Reply
Contributor I

Access Point Second Ethernet Port

Is it possible to have an external device, such as a camera, connected to an access point's second Ethernet port and IPSEC tunnel (the access point will only have an Internet connection) that traffic back to the controller tagged as a different VLAN to the wireless traffic?

Guru Elite

Re: Access Point Second Ethernet Port

Yes.

 

If you have the access point configured as a remote AP, you would set the forwarding mode of the ethernet port to tunnel and set the VLAN you want it to be on in the Wired AP profile.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: