Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Access Point installation installation in mixed mode

This thread has been viewed 0 times

  • 1.  Access Point installation installation in mixed mode

    Posted Mar 27, 2012 12:32 AM

    Hi,

    when you have mixed mode of Access Point like AP-61, AP-121 and AP-105, you need to see the client requirement and configuration details of Wireless Network Point.

     

    so you need to segregate the Access point in Floor wise and had to install

     



  • 2.  RE: Access Point installation installation in mixed mode

    EMPLOYEE
    Posted Mar 27, 2012 01:13 AM

    I'm not sure I understand your question. Are you asking whether you need to separate different access points onto different floors? This is not necessary however if you mix dual radio access points like the AP105 and single radio access points like the AP61 that does not support 11n you will get patchy coverage with certain devices as you will not have dual radio uniform coverage. If I have completely missed your point please rephrase the question. 

     

    Regards,

    Mark



  • 3.  RE: Access Point installation installation in mixed mode

    Posted Aug 16, 2013 08:45 AM

    thanks for the post. the problem got resolved