Access Points 325

[kira]

Hey all, 

i have a trouble with AP 325 Aruba, the AP are steel booting and I can't reset to factory, in the partion i have 0 no os the other partion 1 i have the OS 

apboot> os
Partition 0 does not contain a valid OS image

Partition 1:
image type: 0
machine type: 40
size: 7211308
version: 6.4.4.0-wave2
build string: ArubaOS version 6.4.4.0-wave2 for 32x (p4build@cyprus) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #49847 SMP Thu Apr 30 14:49:32 PDT 2015
flags: preserve factory
oem: aruba

Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.

i boot it in the partion 1 but steel can't reset it 

i read in the forum that i need to change OS because there is a bug in this version: 6.4.4.0-wave2, i can't download the os somme one can help me please 

when the AP boot, it stop in this stat and reboot 

Getting an IP address...
[ 40.157950] Kernel watchdog refresh ended on core 0.
[ 40.277944] Kernel watchdog refresh ended on core 1.
[ 40.722149] eth0: 100Mbps FullDuplex
[ 40.998000] bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex.
[ 41.091783] bonding: bond0: making interface eth0 the new active one.
[ 41.170071] bonding: bond0: first active interface up!
[ 41.230459] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
10.10.10.2 255.255.255.0
Running ADP...

thank you for your help 

[A_RAK]

The boot log does not show the AP finding its master.

Who is the master controller for this AP? 

How is the AP set up to discover the master controller?

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.
--Problem Solved? Click "Accepted Solution" in a post.

[kira]

Thank's for the unswer 

I don't have the master how  can i do if i don't 

I have only one AP, because I recovered it to deploy it in another place, i can't get the controler 

[kira]

Hi community 

Please someone have an idea how to reset it.

thank you 

[cjoseph]

If you have a single AP, the model number on the sticker must say IAP-325, otherwise it cannot operate by itself.  You would need a separate hardware controller to work with an AP-325.

[kira]

Thank you for your answer,

You can find the image i juste shared The mode of the AP, even if i setup the IP of the controler in APboot> herself that don't work i get this promp #, all commande don't work because of the permission, all commande look like linux cmd. 

Thank's

[A_RAK]

https://community.arubanetworks.com/t5/Controller-less-WLANs/Where-is-the-reset-button-on-the-IAP-and-how-do-I-reset-the-IAP/ta-p/180980

Right now it's an APusing ArubaOS 6.4.0.0

If you are unsure whether it's an AP or IAP, hard reset the AP.

If it is an IAP variant , it should come back up as an IAP.

[A_RAK]

This is an AP only variant.

It says ap325 from the image shared. Also it's model is APIN 0325.Thus it needs a controller for it to come up.

[kira]

Hey all

Thank you so much for the answer, how can i do now if i want to get the controleur, i read in the net i can use AirWave with VM  to controle my AP 325, my question is how to download this for free and where i can download it, i buy this AP 325 very expensive for me 

Thanks  

[A_RAK]

What is your requirement for the network?

A controller based AP also requires a license bundle to be purchased additionally for the AP to be used whether it is virtual or hardware based controller.

To use airwave to control the AP , You would first need a standalone MM setup or a MM-MD setup with SNMP&SSH enabled to the airwave server, this just calls for more licenses (MM-VA, MC-VA).

If you just want a wifi device that you can plug a ethernet cable with internet access to and get started, then i'd say swap the AP to an IAP Variant.

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.
--Problem Solved? Click "Accepted Solution" in a post.