Wireless Access

Reply
Highlighted
New Contributor

Adding A Second Radius Server

Hello, I am very new to the Aruba world. I just started with a company that has an Aruba Mobility Controller. I need to add a radius server to this controller. But, i am unsure of a few steps. I can find the add option under Securty>Authentication. And I see where to add the server to the existing server groups. But, i have a question about the shared key. Where does this key come from? Is this something specific to this controller? Or is it just something I assign when adding the server?

 

Any help would be greatly appreciated.

 

Thanks

Highlighted

Re: Adding A Second Radius Server

This is the key your controller (or any other device, e.g. switch) will use to communicate with the RADIUS server. You can use any key as long as it matches to what you have added in the RADIUS server.

 

When you are adding controller as a RADIUS client on your RADIUS server, this is where you will define the key and will configure the same key on your controller.

JayBee
ACDX | ACCX| CCIE (RnS/SP,DC) | ACCP | ACMP | ACSA | ACMA | CWNA | JNCIS | JNCIA
If the provided solution resolves your issue, please mark it as accepted solution to help others.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: