Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Adding new 7220 controller to the network but do not want exisiting AP's to connect to it

This thread has been viewed 0 times

  • 1.  Adding new 7220 controller to the network but do not want exisiting AP's to connect to it

    Posted Mar 02, 2016 08:20 PM

    Hello, as the title says we are going to be adding a new controller to our existing wireless environment but do not want the existing AP's we have in the environment to be picked up by the controller and automatically provisioned to the default profile.  Is there a recommended method to just add the controller onto the wire and have it sit there minding it's business so to speak, without interferering with the existing AP's? 



  • 2.  RE: Adding new 7220 controller to the network but do not want exisiting AP's to connect to it
    Best Answer

    Posted Mar 02, 2016 08:29 PM
    disable ADP discovery
    from CLI
    adp discovery disable

    And if you DNS don't change the Aruba-master to the new controller

    If you use DHCP option 43 don't add this controller

    Then you should be good.



    Sent from Outlook for iPhone