Wireless Access

Reply
New Contributor

Airmatch in high density

Hi - what's the field recommendation based on experience gathered so far on airmatch configuration in high density/very high density deployments? Run Airmatch then freeze APs? Or leave it running? Thanks! 


Accepted Solutions
Highlighted
Guru Elite

Re: Airmatch in high density

Airmatch only changes channel and power once/day (5am by default) unless there is an access point with severe noise.

 

Let it run.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post


All Replies
Highlighted
Guru Elite

Re: Airmatch in high density

Airmatch only changes channel and power once/day (5am by default) unless there is an access point with severe noise.

 

Let it run.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: