Wireless Access

last person joined: 14 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Airwave Signal Quality SNR broken?

This thread has been viewed 15 times

  • 1.  Airwave Signal Quality SNR broken?

    Posted Mar 09, 2019 08:19 AM

    Hi,

     

    Airwave shows the Signal Quality of a client with the SNR Value.

    There is a blue line that shows the signal and a red line that shows the noise.

    We noticed that sometimes when the signal of the client is lost, the blue line (signal) AND the red line (noise) has a lot of gaps.

    I don't understand, why even the noise shows gaps. Does it mean the radio is broken or disabled?

     

    Thanks for any advice

     



  • 2.  RE: Airwave Signal Quality SNR broken?

    EMPLOYEE
    Posted Mar 09, 2019 09:58 AM

    Please open a TAC case about this.  There is not enough information in your post to understand what could be wrong.  Please post screenshots of what you are talking about.



  • 3.  RE: Airwave Signal Quality SNR broken?

    Posted Mar 09, 2019 02:07 PM

    I will attach some screenshots when I'm back in company.



  • 4.  RE: Airwave Signal Quality SNR broken?

    Posted Sep 25, 2019 09:40 PM
    I see the same when I check some of my client devices during troubleshooting. Please see images, so far support is not able to help.