Wireless Access

Reply
Frequent Contributor I

Airwave Signal Quality SNR broken?

Hi,

 

Airwave shows the Signal Quality of a client with the SNR Value.

There is a blue line that shows the signal and a red line that shows the noise.

We noticed that sometimes when the signal of the client is lost, the blue line (signal) AND the red line (noise) has a lot of gaps.

I don't understand, why even the noise shows gaps. Does it mean the radio is broken or disabled?

 

Thanks for any advice

 

Guru Elite

Re: Airwave Signal Quality SNR broken?

Please open a TAC case about this.  There is not enough information in your post to understand what could be wrong.  Please post screenshots of what you are talking about.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Frequent Contributor I

Re: Airwave Signal Quality SNR broken?

I will attach some screenshots when I'm back in company.

Highlighted
Occasional Contributor II

Re: Airwave Signal Quality SNR broken?

I see the same when I check some of my client devices during troubleshooting. Please see images, so far support is not able to help.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: