Wireless Access

Reply
Highlighted
Regular Contributor II

Alerts on the Backup Controller

Hi @ all,

 

I´ve 2 Aruba 651 controller, a master and a backup.

On the backup controller are some alerts after I pushed the config on it:

 

1.JPG

On the master controller I put in the cfgm set sync-type <complete> command.

 

Some user-role are pushed to the backup c. (I can see in on show run on the backup c.)

And it seems like some roles are not correctly syncing to the backup controller.

 

How can I fix this?

 

Is it a why there are no licenses on the backup controller? but I´ve configured central licenses on it and it looks like it´s working.

 

Thanks

 


Accepted Solutions
Highlighted
Moderator

Re: Alerts on the Backup Controller

If you have master redundancy enabled, you don’t need to use a license server IP on the backup.



If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post


All Replies
Highlighted
Moderator

Re: Alerts on the Backup Controller

Can you do a show license on the backup?

 

Are the licenses on the master built-in licenses? For example, if the model of the controller is 651-8, those are built in.



If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

Highlighted
MVP Expert

Re: Alerts on the Backup Controller

 

It seems that you don't have PEF licenses on that controller, if you are using 6.3 you can take advantage of the Centralize Licensing to share the licenses across two controllers.

Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Highlighted
Regular Contributor II

Re: Alerts on the Backup Controller

there are no licenses on the backup controller only the built in.

 

On the bachup controller centralized licenses tap under information I can see the masters licenses:

2.JPG

 

show licenses on the master:

3.JPG

 

show license on the backup:

4.JPG

 

Highlighted
Regular Contributor II

Re: Alerts on the Backup Controller

I´ve central licensing running but the problem ist still there ...

Highlighted
Moderator

Re: Alerts on the Backup Controller

Looks like you have some connectivity issues. All of your heartbeats have been missed.



If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

Highlighted
Regular Contributor II

Re: Alerts on the Backup Controller

Ok, I see it. But what can I do to fix the problem?

 

the controller can ping each other on their IP Adresses!

 

Where do the controller sends the heardbeat? (what ip address?)

Highlighted
Moderator

Re: Alerts on the Backup Controller

Do you have VRRP setup between the master and backup?



If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

Highlighted
Regular Contributor II

Re: Alerts on the Backup Controller

yes, I have, but I can´t give the license server the vrrp adress:

5.JPG


The vrrp adress is 192.168.25.100 and I put in the license server field the 192.168.25.101.

 

Must I configuring on both controlller a new vrrp adress for the license server?

Highlighted
Moderator

Re: Alerts on the Backup Controller

If you have master redundancy enabled, you don’t need to use a license server IP on the backup.



If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: