Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Allow Specific Device To be Routed

This thread has been viewed 0 times

  • 1.  Allow Specific Device To be Routed

    Posted Apr 10, 2019 08:28 AM

    Hi...we have a device (Kramer Via Connect Pro) on our corporate network (172.16.0.0....vlan1). All users on our Corporate wifi can connect to it, as they should. 

    We have a Guest network (10.10.0.0....vlan 100). Of course they cannot connect to this device because it's IP is on the 172.16.0.0 network.

    Is it easy to allow users on our Guest network to connect to the specific IP address of that specific device? Would it be safe? Would it just be a routing issue?

    Any help setting this up would be appreciated. Thanks.



  • 2.  RE: Allow Specific Device To be Routed

    EMPLOYEE
    Posted Apr 15, 2019 05:17 AM

    We would need a diagram of your network to answer that.  If your guest network is natted or unroutable it might not be possible.