Wireless Access

Reply
Highlighted
New Contributor

Aruba 305 firmware version 9.0.0.0

Early Monday morning I updated the firmware for a couple of our Aruba 305's by using the web gui. The version that installed is labeled as 9.0.0.0 which I do not believe exists. Now I cannot get back to the web gui and keep getting error: This site cannot be reached. I can however get to the AP via SSH. When I run show version it shows as 9.0.0.0. Is there a way to revert back to version 8.3.0.6?

Guru Elite

Re: Aruba 305 firmware version 9.0.0.0

Can you do a write erase all?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
New Contributor

Re: Aruba 305 firmware version 9.0.0.0

I am sure I could but I was hoping for a solution that didn't set it back to factory default. Any other suggestions, or is that my only option?

Guru Elite

Re: Aruba 305 firmware version 9.0.0.0

You could downgrade the IAP firmware via the commandline:

 

https://www.arubanetworks.com/techdocs/Instant_41_Mobile/Advanced/Content/UG_files/IAP_maintenance/Firmware_Image_Server_in.htm

 

See"

Upgrading an Image Using CLI


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
New Contributor

Re: Aruba 305 firmware version 9.0.0.0

Check the show image version output, if you find 8.3.0.6 image on the other partition just do "switch-partition-reboot" on the IAP shell

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: