They’re connected to a Cisco 3850-48U switch. There’s two separate switch stacks that several APs are connected to. In one switch, we’ve got some APs that are functional (this just happened with no interference on my part after I posted). Those APs look similar to this when you do a show lldp neighbor detail.
Chassis id: 004e.35c4.d508
Port id: 004e.35c4.d508
Port Description: eth0
System Name: HSS-4123
System Description:
ArubaOS (MODEL: 535), Version Aruba AP
Time remaining: 96 seconds
System Capabilities: B,W
Enabled Capabilities: W
Management Addresses:
IP: 10.20.0.20
Auto Negotiation - supported, enabled
Physical media capabilities:
1000baseT(FD)
Asym Pause(FD)
Pause(FD)
100base-TX(FD)
Other/unknown
Media Attachment Unit type: 30
Vlan ID: - not advertised
PoE+ Power-via-MDI TLV:
Power Pair: Signal
Power Class: Class 4
Power Device Type: Type 2 PD
Power Source: PSE
Power Priority: unknown
Power Requested: 25500 mW
Power Allocated: 25500 mW
MED Information:
MED Codes:
(NP) Network Policy, (LI) Location Identification
(PS) Power Source Entity, (PD) Power Device
(IN) Inventory
H/W revision: 02.03
F/W revision: 2.4.1.21 (69326)
S/W revision: Aruba AP
Serial number: CNHQK9W22W
Manufacturer: Aruba Networks
Model: 535
Capabilities: NP, IN
Device type: Network connectivity
Network Policy(Voice): VLAN 0, untagged, Layer-2 priority: 0, DSCP: 0
Power requirements - not advertised
Location - not advertised
There are other APs on this same switch that look like this:
Chassis id: 004e.35c4.d898
Port id: 004e.35c4.d898
Port Description: eth0
System Name - not advertised
System Description:
ArubaOS (MODEL: 535), Version Aruba AP
Time remaining: 0 seconds
System Capabilities: B,W
Enabled Capabilities - not advertised
Management Addresses - not advertised
Auto Negotiation - not supported
Physical media capabilities - not advertised
Media Attachment Unit type - not advertised
Vlan ID: - not advertised
All APs get IP addresses and have been provisioned by the controller/Mobile Manager. The ones that have the first LLDP information function. The ones with the shorter LLDP information does not. The other switch stack has no functional APs on it. The one with some functional APs is running 03.06.00E code, the other one, we just upgraded to 16.12.3a.