03-22-2014 05:43 AM - edited 03-22-2014 06:16 AM
I have bought an Aruba 620 controller with 4 AP-105 and 4 AP-93 accespoints. My setup is really simple.
My modem is also a router. This is my DHCP/DNS server. It has 192.168.1.1 ip. My Aruba controller is working fine. It has 192.168.1.20 IP. I have runned the wizzards for the controller and AP's. Pointing 1.1 as gateway and dns/dhcp. I have the problem that all my accespoints come up inactive.
I have the latest firmware, 22.214.171.124. (same problem with earlier firmware)
I have created multiple AP groups, no mather in wich one they show up inactive. How do I troubleshoot this problem?
All my ports are trusted and active. I have a POE licence active.
what to do?
Solved! Go to Solution.
Re: Aruba 620 controller with AP-105 inactive state
03-22-2014 06:34 AM
Because you have no Virtual-AP assigned in that ap-group:
show ap-name "AP105-1" show ap ap-group ap-name "AP105-1" AP group "Aruba" ---------------- Parameter Value --------- ----- Virtual AP N/A <----------------- 802.11a radio profile default 802.11g radio profile default Ethernet interface 0 port configuration default Ethernet interface 1 port configuration default Ethernet interface 2 port configuration shutdown Ethernet interface 3 port configuration shutdown Ethernet interface 4 port configuration shutdown AP system profile default
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
03-29-2014 12:42 AM
solved! changed to tunnel mode: http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/AP-105-not-working-in-bridge-mode/td-p/23280