Aruba 7005 VLAN
12-10-2018 08:59 AM - edited 12-11-2018 09:58 AM
I have a problem with the 7005 mobility controller.
I want to setup two wireless networks:
Guest: VLAN 10
User: VLAN 20
I did setup those networks using the wizard, but when I seperate them in two differents ports in the controller (Vlan 10 in GE 0/0/1 and Vlan 20 in GE0/0/2), none of them are put in the correct VLAN.
However, when I configure one port (GE0/0/0) and tag both Vlans in it (Switch side and controller side), it works perfectly.
Edit: I did disable Spanning Tree protocol on GE0/0/1 and GE0/0/2, works like a charm.
I don't know why Spanning Tree blocked theses ports even thought they were on seperate VLANs.