Wireless Access

Hellooo :smileyhappy:

I have a Problem with upgrading this controller. :smileyfrustrated:

Already SW-Version 6.0.1.3 is running on partition 1 , Now i want to do a upgrade to version 6.1.3.1.

But it is not working,

The failure is : disk space is full.

With the show storage command i can see this :

(OAW-4306G) #show storage
Filesystem                Size      Used Available Use% Mounted on
none                    300.0M      1.5M    298.5M   1% /tmp
/dev/mtdblock11         156.0M    126.2M     29.8M  81% /flash
/dev/mtdblock9           50.0M     40.2M      9.8M  80% /mnt/img0
/dev/mtdblock10          50.0M     44.8M      5.2M  90% /mnt/img1

In the RN is is written that i need at least 75MB of free space to do the upgrade.

What is necessary for a functional Upgrade ?

Thank you for your help !

BR

In your case you have 29MB free on the flash.   You'll need to remove any unnecessary files.   From the CLI, run dir to see what files are on the flash; and their sizes.  Remove or copy off what you can to free up some space.   I am not positive on all the pertinent files to leave, but remove any crash files, logs.tar, backup configs, AP tech-support logs, etc.   

Hello !

I have already deleted all possible files.

The only way to install the newest SW on partition 1 was to downgrade part. 0 to 3.4.5.0 !

But that should not be the only way to do that !

BR