Wireless Access

This community is currently in a read-only state due to a maintenance window. For more info click here
Reply
Highlighted
Frequent Contributor I

Aruba Controller CLI Command Reference

is there a way to clear the interface counters on an aruba controller?  If so what is the command?


Accepted Solutions
Highlighted
Aruba

Re: Aruba Controller CLI Command Reference

There is no global command you need to do it per port, tunnel, or vrrp interface.

------------------------------------------------
Systems Engineer, Northeast USA
AMFX | ACCX | ACDX | ACMX

View solution in original post


All Replies
Highlighted
Frequent Contributor I

Re: Aruba Controller CLI Command Reference

Looking for the global command, instead of the individual interface.

Highlighted
Aruba

Re: Aruba Controller CLI Command Reference

There is no global command you need to do it per port, tunnel, or vrrp interface.

------------------------------------------------
Systems Engineer, Northeast USA
AMFX | ACCX | ACDX | ACMX

View solution in original post

Highlighted
Frequent Contributor I

Re: Aruba Controller CLI Command Reference

Thats what I thought, bummer, thanks for the information...

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: