Aruba IAP 105 Bandwidth throttled to 60%
05-27-2018 09:25 PM
I'm not able to get complete internet bandwidth even if Transmit rate is 300 Mbps. My input internet bandwidth is 250Mbps. Even at TX 300Mbps, I see max 160Mbps with speedtest.net If I get any other router/access point, I do get 250Mbps. I see the bandwidth is always throttled to 60% of transmit rate available. This is not the case with other Wi-Fi routers I was testing. I'm on firmware version 184.108.40.206-220.127.116.11_54910
Here are few settings which I have tried:
Band steering mode: 5Ghz
Airtime fairness mode: Preferred Access
Min transmit power: 12
Max transmit power: Max
Broadcast filtering: ARP
Multicast transmission optimization: disabled
Dynamic multicast optimization: disabled
My full dump of running configs I have attached.
Any pointers to resolve this issue would be of great help.
Re: Aruba IAP 105 Bandwidth throttled to 60%
05-28-2018 12:48 AM
The connection speed in Wireless is not equal to the TCP Throughput that you measure with a SpeedTest.
First, there is a lot of error correction and other overhead second Wireless is a half-duplex medium. So the traffic from AP to the client shares the same 'airtime' with the traffic from client to AP. As a (very) rough estimate, if you get half of the link speed as TCP throughput in a linktest, the network is performing quite okay and that is expected.
The numbers that you report seem pretty acceptable to me for a 300 Mbps 802.11n connection. You can't expect to get a speedtest at the rate something even near to the link speed.
This advertised speed versus nominal TCP throughput is something across the industry where higher numbers look better on datasheets.
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).