Wireless Access

last person joined: 19 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Aruba IAP wireless bridge solution

This thread has been viewed 4 times

  • 1.  Aruba IAP wireless bridge solution

    Posted Aug 23, 2018 02:28 PM

    I have a customer that is interested in a wireless bridge to extend their network to another building - no obstructions, straight line of sight path, about 1000 ft give or take.  There's a good chance it will be on a pole on the roof but there's a chance we may put inside near an outside facing window on both ends (still a clear line of sight).  I haven't spent much time in the P2P sector of Aruba wireless.  Just the little that I have gathered, I believe I could purchase 2x AP-367 and point them at each other - then enable mesh mode?  This article is a little old but I assume still applicable?  https://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-configure-IAPs-as-Mesh-Portal-and-Point/ta-p/186886

     

    Please let me know if you've had any experience with Aruba wireless bridging and your recommendations.

     

    Thanks