Wireless Access

last person joined: 19 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Aruba OS for 7200 controllers

This thread has been viewed 0 times

  • 1.  Aruba OS for 7200 controllers

    Posted Sep 09, 2013 07:13 AM

    Hello,

     

    My network is made up 2 6000 controllers with M3 and other 2 6000 controllers with SC1, I'm going to replace 2 controllers (SC1) for 2 new 7200 controllers, the question is:

     

    What's the minimum Aruba OS supported by 7200 controllers?.

     

    I'm currently running OS 5.0.3.0, so what path should I follow to upgrade??

     

    Thank you



  • 2.  RE: Aruba OS for 7200 controllers
    Best Answer

    EMPLOYEE
    Posted Sep 09, 2013 07:38 AM

    The min is 6.2 but I would recommend our latest 6.3 code.



  • 3.  RE: Aruba OS for 7200 controllers
    Best Answer

    EMPLOYEE
    Posted Sep 09, 2013 07:48 AM

    You'll want to upgrade to 5.0.4.12 then to 6.2.

     

    6.2 is supported on 72x0, M3, 3x00, and the 600 series controllers.

     

     



  • 4.  RE: Aruba OS for 7200 controllers

    MVP
    Posted Sep 09, 2013 09:45 AM

    The SC1 do not support 6.X code. That likely prevents them from upgrading their existing infrastructure to 6.X.



  • 5.  RE: Aruba OS for 7200 controllers

    Posted Sep 10, 2013 02:45 AM

    Yes, you are right.

     

    Due to it, we are planning upgrade to 2 7200 ( replacement of 6000 with SC1), but the problem is that 7200 come with Aruba OS 6.x (minimum) and our network run AOS 5.0.3.

     

    So, the upgrade should be

     

    1.- upgrade our network to 5.0.4.12.

    2.- upgrade to 6.x, taking out our SC1 controllers.

    3.- install the new 7200 with 6.x