Wireless Access

Reply
Highlighted
Occasional Contributor II

Aruba RAP in Rc2I mode

I converted IAP 315 to RAP. Now it shows flag as Rc2I. I want this RAP to plug into home network so I can connect back to work network and broadcast work SSIDs. Please help!

MVP

Re: Aruba RAP in Rc2I mode

Which AP-group did you provision this RAP in?

Does this AP-group have any VAPs active?

Does the AP stay up permanently with the Rc2I-flags, or does it rebootstrap?

Aranya AB, Sweden
ACMP, ACCA, CWNA, CWDP
MVP Guru

Re: Aruba RAP in Rc2I mode

Can you please confirm the last flag you are seeing, is this either "l" or "I".

 

 L = Unlicensed : Check you have enough licenses available for the RAP. (#show license limits)

 

I = Inactive : As what @dojjan said, check you have the necessary VLAN's in place on the controller which is terminating the RAP. On the controller where the RAP terminates, run the command #show profile-errors to see if there is any errors with your configuration.


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: