Wireless Access

Reply

ArubaOS 6.4.2.4 (Also tested on 6.4.2.3) | WIP & RFP question AD-HOC + NO UCC INFO at all

Hi Guys,

Good morning,

 

I just deployed aruba controller at one of my sites , and the client asked me to config the WIP module... i did it as alawyas - but , then i we check and notice that AD-HOC devices..even if they marked to be contained - are able to connect (iPhone6 ... keep changing his channles... and also Galaxy NOTE 3 teethring working even due it's marked to be contained)

Detect Ad-HOC is marked

and also Protect aginst ad-hoc + Enahched protection against AD-HOC..but still.

 

it's seems that the WIP module taking couple of good minutes to see the AD-HOC ..and even after that..it's just no blocking it as needed.

 

Please advise?

-----------------------

2nd question

-----------------------

UCC just not showing any data...even due that i marked on the Stateful Firewall > Global Settings 

Enable Deep Packet Inspection

 

Why is that?

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Guru Elite

Re: ArubaOS 6.4.2.4 (Also tested on 6.4.2.3) | WIP

UCC dashboard will only show data if calls are detected. Are you trying to detect generic SIP or Lync traffic? 

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

Re: ArubaOS 6.4.2.4 (Also tested on 6.4.2.3) | WIP

anything that is VOIP (SIP & LYNC)
*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************

Re: ArubaOS 6.4.2.4 (Also tested on 6.4.2.3) | WIP

and we cant see nothing under the UCC dashboard
*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Guru Elite

Re: ArubaOS 6.4.2.4 (Also tested on 6.4.2.3) | WIP

You'll need to setup classify media ACLs. Have you taken a look at the Lync VRD? 

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

Re: ArubaOS 6.4.2.4 (Also tested on 6.4.2.3) | WIP

OK , And ,Without the ACL (classify media) it will not work? (the ucc?) and i should build insert this ACL to the users ACL.

 

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Guru Elite

Re: ArubaOS 6.4.2.4 (Also tested on 6.4.2.3) | WIP

It may detect some traffic, but classify media ensures that an ALG gets applied and traffic is analyzed.


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: