Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

ArubaOS 6.4 - Can i route IPv6 Traffic to IPv4 default GW?

This thread has been viewed 0 times

  • 1.  ArubaOS 6.4 - Can i route IPv6 Traffic to IPv4 default GW?

    Posted Feb 08, 2017 05:19 AM

    Hi Guys,

    I configured an IPv6 VLAN on the controller + DHCP - client getting the needed addresss on that VLAN , BUT , I would like to know if i can route traffic to IPv4 GW? (For example to Default GW on the controller)

     

    Please advise.

     

    Thanks in advance,

     

    Me.



  • 2.  RE: ArubaOS 6.4 - Can i route IPv6 Traffic to IPv4 default GW?
    Best Answer

    Posted Feb 09, 2017 09:31 AM

    This isn't supported as far as I can see. The controller would need to do NAT-PT on the ipv6 traffic to enable it to communicate with the ipv4 gateway. Controllers don;t support NAT-PT.

     

     



  • 3.  RE: ArubaOS 6.4 - Can i route IPv6 Traffic to IPv4 default GW?

    Posted Feb 09, 2017 09:49 PM

    Thanks for the info (I passed on the UG and seen the notes)

     

    1.jpg

    2.jpg