Wireless Access

Reply
Highlighted
MVP Guru

Re: Arubaos 8.5.0.8 - IPv6 disable , but still active clients showed with IPv6 in user-table?!

The fe80:: IPv6 addresses are link-local IPs and many clients these days automatically get those, which doesn't mean you should see them in the user table. The default 'validuser' acl even blocks these out for appearing in the user table. Did you modify the validuser acl?

ip access-list session validuser
    network 127.0.0.0 255.0.0.0 any any deny
    network 169.254.0.0 255.255.0.0 any any deny
    network 224.0.0.0 240.0.0.0 any any deny
    host 255.255.255.255 any any deny
    network 240.0.0.0 240.0.0.0 any any deny
    any any any permit
    ipv6 host fe80:: any any deny
    ipv6 network fc00::/7 any any permit
    ipv6 network fe80::/64 any any permit
    ipv6 alias ipv6-reserved-range any any deny
    ipv6 any any any permit
!

I agree that if IPv6 is disabled that I would not expect to see IPv6 user entries. Please open a support case if you see those.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: