Thanks Colin.
The AAA, SSID and Virtual-AP profiles are as similar as I can make them.
We just attempted a connection with the Aruba-User-Vlan assigned from Clearpass but get the same. Some outputs below:
auth-tracebuf:
Nov 24 12:55:02 mac-auth-req -> 00:30:e6:04:fc:01 00:1a:1e:01:cf:c6 - -
Nov 24 12:55:02 mac-auth-success <- 00:30:e6:04:fc:01 00:1a:1e:01:cf:c6 - -
Nov 24 12:55:02 assg-vlan-req * 00:30:e6:04:fc:01 00:1a:1e:01:cf:c6 1 71 new vlan: from mac auth for wireless
Nov 24 12:55:02 assg-vlan-resp * 00:30:e6:04:fc:01 00:1a:1e:01:cf:c6 - 71
Nov 24 12:55:02 station-up * 00:30:e6:04:fc:01 00:1a:1e:01:cf:c6 - - wpa2 psk aes
Nov 24 12:55:02 wpa2-key1 <- 00:30:e6:04:fc:01 00:1a:1e:01:cf:c6 - 117
Nov 24 12:55:02 wpa2-key2 -> 00:30:e6:04:fc:01 00:1a:1e:01:cf:c6 - 117
Nov 24 12:55:02 wpa2-key3 <- 00:30:e6:04:fc:01 00:1a:1e:01:cf:c6 - 175
Nov 24 12:55:02 wpa2-key4 -> 00:30:e6:04:fc:01 00:1a:1e:01:cf:c6 - 95
(Aruba-1) # show station-table mac 00:30:e6:04:fc:01
Association Table
-----------------
BSSID AP IP Essid AP name Phy Age
--------------- ------------ ------- ------- --- ---
00:1a:1e:01:cf:c6 192.168.196.239 uhsm-psk FB-1F-Corridor_F3/4 g- 00:00:01
(Aruba-1) #show user mac 00:30:e6:04:fc:01
The phy column shows client's operational capabilities for current association
Flags: A: Active, B: Band Steerable, H: Hotspot(802.11u) client, K: 802.11K client, R: 802.11R client, W: WMM client, w: 802.11w client
PHY Details: HT : High throughput; 20: 20MHz; 40: 40MHz
VHT : Very High throughput; 80: 80MHz; 160: 160MHz; 80p80: 80MHz + 80MHz
<n>ss: <n> spatial streams
Association Table
-----------------
Name bssid mac auth assoc aid l-int essid vlan-id tunnel-id phy assoc. time num assoc Flags Band steer moves (T/S)
---- ----- --- ---- ----- --- ----- ----- ------- --------- --- ----------- --------- ----- ----------------------
FB-1F-Corridor_F3/4 00:1a:1e:01:cf:c6 00:30:e6:04:fc:01 y y 1 16 uhsm-psk 71 0x10506 g 1m:59s 1 A 0/0
00:30:e6:04:fc:01-00:1a:1e:01:cf:c6 Stats
------------------------------------------
Parameter Value
--------- -----
Channel 11
Channel Frame Retry Rate(%) 0
Channel Frame Low Speed Rate(%) 0
Channel Frame Non Unicast Rate(%) 0
Channel Frame Fragmentation Rate(%) 0
Channel Frame Error Rate(%) 4
Channel Bandwidth Rate(kbps) 0
Channel Noise 101
Client Frame Retry Rate(%) 0
Client Frame Low Speed Rate(%) 0
Client Frame Non Unicast Rate(%) 0
Client Frame Fragmentation Rate(%) 0
Client Frame Receive Error Rate(%) 0
Client Bandwidth Rate(kbps) 0
Client Tx Packets 4
Client Rx Packets 3
Client Tx Bytes 320
Client Rx Bytes 422
Client SNR 27
(Aruba-1) # show user-table | include 00:30:e6:04:fc:01
(Aruba-1) #
I've also attached the user-debug log for this association.
Thanks