At a loss here...
04-03-2019 08:00 AM - edited 04-03-2019 08:04 AM
I bought 10 IAP-207s and I have 9 of them working.
When I plug the AP into my Aruba switch in the datacenter it comes up just fine on my virtual controller.
When I plug it in to the network jack in the ceiling out in the field PoE works but it never comes up in the controller and is not pingable.
When I plug a laptop in to the same network jack I get an IP and it works fine.
I have re-terminated the connection.
I am at a loss. Works in the Data center but does not work in the field when patched into the exact same switch port.. I have also tried multiple patch cables.
Re: At a loss here...
04-03-2019 09:39 AM
Do you have a console cable, so that you can look at the AP's output when it boots up?
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars