01-02-2018 01:43 PM
Running ArubaOS 126.96.36.199 on a 3400 controller.
I've realized that I will need a 7x-series controller or better to be able to use throttling on AppRF, but setting up bandwidth contracts on apps seems to be allowed in the WebUI, but it doesn't seem to work..
Is there anything I could have missed during configuration of this?
At the moment the following is set up:
All with 1mbps up/down for test..
I've verified that a more general role-based bandwidth contract work just fine.
The reason for doing this is that the internet connection is done through 4G with a limit on data. The past weeks I've seen a large increase of data usage, and the monthly limit won't hold for more than 10 days if this situation persists..
Suggestions for other ways to get around this problem would of course be highly appreciated.
As the devices and computers the increased usage derives from also is used for more important tasks, it's not really an option to either block them or give them a role with a hard bandwidth contract.
Solved! Go to Solution.
01-02-2018 03:14 PM
AppRF 2.0 will only work on 7000 series controllers, even though it allows you to configure it, unfortunately. Sometimes you have a master that is not a 7000 series controller that you can configure the policies with, but if the client traffic terminates on anything besides a 7000 series controller, it will not be enforced.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars